Socket CPU Silent Mode (1,350~1,800rpm) Low-noise Mode (1,800~2,600rpm) Compatible Motherboard Notes

AMD AM3 Phenom II Supports all speeds Supports all speeds AMD sockets require Stock Retention Frame Athlon II AM2+ Phenom II Supports all speeds Supports all speeds Phenom Athlon FX Athlon X2 Athlon Sempron AM2 Athlon FX Supports all speeds Supports all speeds Athlon X2 Athlon Sempron 940 Dual-Core Opteron Supports all speeds Supports all speeds Opteron Athlon FX 939 Dual-Core Opteron Supports all speeds Supports all speeds Opteron Athlon FX Athlon X2 Athlon 754 Athlon Supports all speeds Supports all speeds Sempron

�� To use the CNPS9500 series coolers on socket 1366, ZM-CS4A must be purchased separately.

Dimensions 85(L) x 112(W) x 125(H) mm Weight 530g Base Material Pure Copper Dissipation Area 3,698? Thermal Resistance Silent Mode 0.16��C/W Low-noise Mode 0.12��C/W

Bearing Type 2 Ball-Bearing Speed Silent Mode 1,350rpm �} 10 % Low-noise Mode 2,600rpm �} 10 % Noise Level Silent Mode 18.0dBA �} 10% Low-noise Mode 27.5dBA �} 10%

Dimensions : 70(L) x 26(W) x 26(H) mm Weight : 20g Output Voltage : 5V ~ 11V �} 2% Allowable Power : 6W or lower Connector : 3-Pin

Compatible with AMD Opteron, Athlon 64 x2 Dual-Core, Athlon 64 FX, Athlon 64, and Sempron for Socket AM2/754/939/940. Pure copper heatsink with component layout optimized for maximum cooling efficiency. Innovative, patented, and curved heatpipe design for a heat transfer capacity of up to six heatpipes with the use of just three. Ultra slim fins (0.2mm) for minimized weight and reduced airflow resistance. Adjustable fan speed controller (FAN MATE 2) included.

Cases equipped with an Air Guide must have their Air Guide Ducts removed before installation. Install only on systems meeting the following conditions : There must be no interfering components (e.g. PSU, VGA card) within 56mm distance from the center of the CPU. There must be no interfering components (e.g. ODD) within 45mm distance from the center of the CPU. Case chassis cover must be distanced at least 135mm away from the motherboard.

- CNPS9500 AM2 - Thermal Grease - FAN MATE 2 (Fan Speed Controller) - Cable for FAN MATE 2 - Double-sided Tape(to attach FAN MATE 2) - One(1) Clip - One(1) Lever - User�fs Manual

Zalman affixes a Computer Noise Prevention System (CNPS) mark to all components used for noiseless computers.

Korean Patent Application No. 05-45737 Korean Design Applications No. 05-15303, 15304, 15306, 15307, 17970, 17971 Patent applications pending in over 20 nations around the world including USA, EU, and Japan.

The maximum weight specified for a cooler is 450g for AMD socket AM2/754/939/940. Special care and attention must be taken when moving a computer equipped with a cooler exceeding the specified weight limit. Zalman Tech Co., Ltd. is not responsible for any damage resulting from moving a computer. When booting the computer, it may automatically power down after an alarm sound is set off by a system monitoring program. This indicates that the CPU fan is rotating slowly. If this happens, turn the Control Knob fully clockwise to increase the fan speed. Then set �eCPU Fan Detected�f to �eDisabled�f in BIOS settings, or set the slowest rotational speed of the CPU fan in the system monitoring program to less than or equal to 1300rpm. Zalman Tech Co., Ltd. is not responsible for any damage resulting from CPU OVERCLOCKING.