Socket CPU Silent Mode (1,400~1,700rpm) Low-noise Mode (1,700~2,600rpm) Notes

Intel 775 Core 2 Duo Supports all speeds Supports all speeds - Pentium D Pentium 4 Celeron D AMD AM3(1) Phenom II Supports all speeds Supports all speeds AMD sockets require Stock Retention Frame Athlon II AM2+(1) Phenom II Supports all speeds Supports all speeds Phenom Athlon FX Athlon X2 Athlon Sempron AM2(1) Athlon FX Supports all speeds Supports all speeds Athlon X2 Athlon Sempron 940 Dual-Core Opteron Supports all speeds Supports all speeds Opteron Athlon FX 939 Dual-Core Opteron Supports all speeds Supports all speeds Opteron Athlon FX Athlon X2 Athlon 754 Athlon Supports all speeds Supports all speeds Sempron

Note(1) The distance from the end of AM2/AM2+/AM3 retention frame to RAM slot should be at least 18mm, or interference may occur. Please refer to the manual and the layout of the M/B for any possible interference and feasibility of creating Dual-Channel configuration.

Dimensions 108(L) x 108(W) x 62.5(H) mm Weight 350g Base Material Pure Copper & Pure Aluminum Dissipation Area 2,815? Thermal Resistance Silent Mode 0.2��C/W Low-noise Mode 0.13��C/W

Bearing Type 2 Ball-Bearing Speed Silent Mode 1,400rpm �} 10 % Low-noise Mode 2,600rpm �} 10 % Noise Level Silent Mode 18.0dBA �} 10% Low-noise Mode 30.0dBA �} 10%

Dimensions : 70(L) x 26(W) x 26(H) mm Weight : 20g Output Voltage : 5V ~ 11V �} 2% Allowable Power : 6W or lower Connector : 3-Pin

Compatible with Slim and Low Profile Computer Enclosures. Noiseless and vibration-free operation in Silent Mode. Optimum performance and quick heat dispersion achieved with the use of 4 heatpipes. Optimized fin design for lightness and higher performance. Ultra quiet 92mm fan. Compatible with Intel Pentium D (Socket 775), Intel Pentium 4 (Socket 775), AMD Athlon 64 x2 (Socket 939), and AMD Sempron/AMD64 (Socket 754/939/940). FAN MATE 2 included for manual adjustment of fan speed.

Common Components - One CNPS8000 - One Thermal Grease - One FAN MATE 2 (Fan Speed Controller) - One Cable for FAN MATE 2 - One Double-sided Tape (for attaching FAN MATE 2) - One User�fs Manual Components for Intel Pentium D/Pentium 4 (Socket 775) - Two Clips for Socket 775 - One Backplate for Socket 775 Components for AMD AMD64 (Socket 754/939/940) - One Clip-A for AMD64 - One Clip-B for AMD64

Zalman affixes a Computer Noise Prevention System (CNPS) mark to all components used for noiseless computers.

Korean Patent Application No. 2005-117680 Korean Design Application No. 2005-37714 Patent applications pending in over 20 nations around the world including USA, EU, and Japan.

The computer system may automatically shut down when booting the computer after the system monitoring program outputs a warning stating that the CPU fan is rotating slowly. In such a case, fully turn the speed control knob in the clockwise direction before booting to disable the �eCPU Fan Detected�f option in BIOS setting, or set the CPU fan�fs rotational speed to less than or equal to 1300rpm in the system monitoring program. Zalman Tech Co., Ltd. is not responsible for any damages resulting from CPU Overclocking.