Select Language
English
ѱ
Home > Product > Coolers >
CPU Coolers
CNPS7500-Cu LED
More
CNPS8000A
CNPS10X Performa
CNPS10X Flex
CNPS9900A LED
CNPS10X Quiet
CNPS9900 NT
CNPS10X Extreme
VF2000 LED
CNPS7000C-AlCu LED
CNPS7000C-Cu LED
CNPS7000C-AlCu
CNPS7000C-Cu
CNPS9300 AT
CNPS8700 NT
CNPS9500A LED
CNPS8700 LED
CNPS7500-AlCu LED
CNPS9700 NT
CNPS9700 LED
CNPS8000
CNPS9500 AM2
CNPS9500 AT
CNPS7700-Cu LED
CNPS7700-AlCu LED
CNPS7700-Cu
CNPS7700-AlCu
Silent and pure-copper blue LED CPU cooler with optimal performance and structure, supporting all sockets.
Pentium 4, Celeron D, Pentium D, Core 2 Duo, Core 2 Quad, Pentium Dual Core, Core i7, Core i5, Core i3, Sempron, Athlon, Athlon FX, Opteron, Dual-Core Opteron, Phenom, Athlon X2, Phenom II, Athlon II
iXBT Brand 2008 – Choice of Readers
The Best of 2007: X-bit Labs Readerfs Choice Awards
Socket
CPU
CPU Compatibility
Intel
1156
(1)
Core i7
Supports all speeds
Core i5
Core i3
775
Core 2 Quad
Supports all speeds
Core 2 Duo
Pentium Dual Core
Pentium D
Pentium 4
Celeron D
AMD
AM3
Phenom II
Up to 945 (95W lower)
Athlon II
Supports all speeds
AM2+
Phenom
Up to 9650 (95W lower)
Athlon FX
Supports all speeds
Athlon X2
Athlon
Sempron
AM2
Athlon FX
Supports all speeds
Athlon X2
Athlon
Sempron
940
Dual-Core Opteron
Supports all speeds
Opteron
Athlon FX
939
Dual-Core Opteron
Supports all speeds
Opteron
Athlon FX
Athlon X2
Athlon
754
Athlon
Supports all speeds
Sempron
 
Note
(1)
Customers that purchased coolers before the inclusion of support for socket 1156, can purchase the separately sold
 
ZM-CS5B
mounting kit for installation onto socket 1156.
No motherboard components with a height greater than 39mm, as well as the PSU, disk drives, VGA card, and RAM should be present within a 61mm radius from the center of the CPU.
No motherboard components with a height greater than 39mm, as well as the PSU, disk drives, VGA card, and RAM should be present within a 61mm radius from the center of the CPU.
AMD sockets require Stock Retention Frame.
Dimensions
121(L) x 121(W) x 67(H) mm
Weight
848g
Base Material
Pure Copper
Dissipation Area
3,500?
Bearing Type
2 Ball-Bearing
Speed
(1)
1,150rpm } 10% ~ 2,300rpm } 10%
Noise Level
(2)
17dBA } 10% ~ 32dBA } 10%
(1)
The fan operates at 2,550rpm (34.5dBA) if directly connected to the motherboardfs power connector without the use of
FAN MATE2.
(2)
Measured 1m distance away from source.
Dimensions : 70(L) x 26(W) x 26(H) mm
Weight : 20g
Output Voltage : 5V ~ 11V } 2%
Allowable Power : 6W or lower
Connector : 3-Pin
Does not generate noise or vibration in Silent Mode.
Pure copper base materials ensure excellent heat dissipation.
Compatible with all single and dual core CPUs for Intel Socket 1156/775 and AMD Sockets AM3/AM2+/AM2/754/939/940.
The high intensity blue LED installed silent 110mm fan inside the heatsink maximizes cooling performance.
The adjustable fan speed controller (FAN MATE 2) enables control of noise and fan performance.
- Cooler (CNPS7500-Cu LED)
- Clip Support
- Clip Support Fixing Bolts
- Washers
- Nuts
- Thermal Grease
- Clip Lever
- FAN MATE 2
- FAN MATE 2 Cable
- Double-Sided Tape
- Userfs Manual
Zalman affixes a Computer Noise Prevention System (CNPS) mark to all components used for noiseless computers.
Korean Patent Reg. No. 389257
Korean Design Reg. No. 327440-3
Patent applications pending in over 20 nations around the world including USA, EU, and Japan.
The maximum weight for a cooler is specified as 450g for Intel Socket 1156/775 and AMD Sockets AM3/AM2+/AM2/754/939/940. Special care should be taken when moving a computer equipped with a cooler that exceeds the specified weight limit. Zalman is not responsible for any damage that occurs when moving a computer.
The computer system may automatically shut down when booting the computer after the system monitoring program outputsa warning stating that the CPU fan is rotating slowly. In such a case, fully turn the Speed Control Knob in the clockwise direction before rebooting to disable the eCPU Fan Detectedf option in BIOS, or set the CPU fanfs rotational speed to 1,150rpm or lower in the system monitoring program.
Zalman Tech Co., Ltd. is not responsible for any damages resulting from CPU Overclocking.