Socket CPU CPU Compatibility

Intel 1156(1) Core i7 Supports all speeds Core i5 Core i3 1366(2) Core i7 Supports all speeds 775 Core 2 Extreme Supports all speeds Core 2 Quad Core 2 Duo Pentium D Pentium 4 Celeron D AMD AM3 Phenom II Supports all speeds Athlon II AM2+ Phenom II Supports all speeds Phenom Athlon FX, Athlon 64 FX Athlon X2, Athlon 64 X2 Athlon, Athlon 64 Sempron AM2 Athlon FX, Athlon 64 FX Supports all speeds Athlon X2, Athlon 64 X2 Athlon, Athlon 64 Sempron 940 Dual-Core Opteron Supports all speeds Opteron Athlon FX, Athlon 64 FX 939 Dual-Core Opteron Supports all speeds Opteron Athlon FX, Athlon 64 FX Athlon X2, Athlon 64 X2 Athlon, Athlon 64 754 Athlon, Athlon 64 Supports all speeds Sempron

Note(1) Customers that purchased coolers before the inclusion of support for socket 1156, can purchase the separately sold   ZM-CS5A or ZM-CS5B mounting kit for installation onto socket 1156. Note(2) The mounting kit ZM-CS4A can be purchased separately for installation onto socket 1366.

Cases equipped with an Air Guide must have their Air Guide Ducts removed before installation. Install only on systems meeting the following conditions.   There must be no interfering components (e.g. PSU, VGA card) within 56mm distance from the center of the PSU. There must be no interfering components (e.g. ODD) within 45mm distance from the center of the CPU. Case chassis cover must be distanced at least 135mm away from the motherboard.

Dimensions 85(L) x 112(W) x 125(H) mm Weight 530g Base Material Pure Copper Dissipation Area 3,698㎠ Thermal Resistance 0.12 ~ 0.16°C/W

Bearing Type 2 Ball-Bearing Speed 1,350rpm ± 10 % ~ 2,600rpm ± 10 % Noise Level 18.0dBA ± 10% ~27.5dBA ± 10%

Dimensions : 70(L) x 26(W) x 26(H) mm Weight : 20g Output Voltage : 5V ~ 11V ± 2% Allowable Power : 6W or lower Connector : 3-Pin

Does not generate noise or vibration in Silent Mode. Pure copper heatsink with component layout optimized for maximum cooling efficiency. Innovative, patented, and curved heatpipe design for a heat transfer capacity of up to six heatpipes with the use of just three. Ultra slim fins (0.2mm) for minimized weight and reduced airflow resistance. Equipped with Zalman’s low noise 92mm fan. Supports all single and dual core CPUs of Intel’s Socket 1156/1366/775 and all single and dual core CPUs of AMD’s Socket AM3/AM2+/AM2/754/939/940. The adjustable fan speed controller (FAN MATE 2) enables control of noise and cooling performance.

Common Components - Cooler (CNPS9500A LED) - Clip - FAN MATE 2 - FAN MATE 2 Cable - Double-Sided Tape - Thermal Grease - User’s Manual   Intel Components - Clip Support - Clip Support Fixing Bolts - Intel Clip Lever - Washers - Nuts - Clip Fixing Bolts   AMD Components - AMD Clip Lever

Zalman affixes a Computer Noise Prevention System (CNPS) mark to all components used for noiseless computers.

Korean Patent Application No.10-0600448 Korean Design Application No. 30-0403411, 0403412 Patent applications pending in over 20 nations around the world including USA, EU, and Japan.

The maximum weight specified for a cooler is 450g for Intel Socket 1156/1366/775 and AMD Socket AM3/AM2+/AM2/754/939/940. Special care and attention must be taken when moving a computer equipped with a cooler exceeding the specified weight limit. Zalman Tech Co., Ltd. is not responsible for any damage resulting from moving a computer. Excessive force exerted on the fan may damage the fan, resulting in damage to the system. Do not ingest or make oral contact with the Thermal Grease. If ingested, get medical attention. Disclaimer) Zalman Tech Co., Ltd. is not responsible for any damages due to external causes, including but not limited to, improper use, problems with electrical power, accident, neglect, alteration, repair, improper installation, or improper testing. The computer system may automatically shut down when booting the computer after the system monitoring program outputs a warning stating that the CPU fan is rotating slowly. In such a case, fully turn the Speed Control Knob in the clockwise direction before rebooting to disable the ‘CPU Fan Detected’ option in BIOS, or set the CPU fan’s rotational speed to 1,350rpm or lower in the system monitoring program. Zalman Tech Co., Ltd. is not responsible for any damages resulting from CPU Overclocking.