Socket CPU CPU Compatibility

Intel 1156(1) Core i7 Supports all speeds Core i5 Core i3 775 Core 2 Extreme Supports all speeds Core 2 Quad Core 2 Duo Pentium D Pentium 4 Celeron D AMD AM3 Phenom II Supports all speeds Athlon II AM2+ Phenom II Supports all speeds Phenom Athlon FX, Athlon 64 FX Athlon X2, Athlon 64 X2 Athlon, Athlon 64 Sempron AM2 Athlon FX, Athlon 64 FX Supports all speeds Athlon X2, Athlon 64 X2 Athlon, Athlon 64 Sempron 940 Dual-Core Opteron Supports all speeds Opteron Athlon FX, Athlon 64 FX 939 Dual-Core Opteron Supports all speeds Opteron Athlon FX, Athlon 64 FX Athlon X2, Athlon 64 X2 Athlon, Athlon 64 754 Athlon, Athlon 64 Supports all speeds Sempron

Note(1) Customers that purchased coolers before the inclusion of support for socket 1156, can purchase the separately sold   ZM-CS5B mounting kit for installation onto socket 1156.

No motherboard components such as the PSU, disk drives, VGA card, and RAM with a height greater than 39mm should be present within a 61.5mm radius from the center of the CPU.

Dimensions 120(L) x 123(W) x 67(H) mm Weight 475g Base Material Pure Copper Dissipation Area 3,300㎠

Bearing Type 2 Ball-Bearing Speed(1) 1,150rpm ± 10% ~ 2,300rpm ± 10% Noise Level(2) 17.5dBA ± 10% ~ 33dBA ± 10%

(1) The fan operates at 2,550rpm (35.5dBA) if directly connected to the motherboard’s power connector without the use of FAN MATE2.

(2) Measured 1m distance away from source.

Dimensions : 70(L) x 26(W) x 26(H) mm Weight : 20g Output Voltage : 5V ~ 11V ± 2% Allowable Power : 6W or lower Connector : 3-Pin

Compatible with all single, dual, and quad core CPUs for Intel socket 775 and AMD socket AM2/754/939/940. Compatible with Slim Tower / Low Profile Home Theatre PC Enclosures. 100% pure copper heatsink with aerodynamically optimized “tunnel” design for high performance cooling. Patented curved heatpipe design for heat transfer performance of up to 4 heatpipes using just 2. Ultra-thin 0.2mm fins for minimized weight and significantly reduced airflow resistance. The 110mm fan inside the heatsink cools not only the CPU, but the VGA card, Northbridge, FET, and RAM as well. Does not generate noise or vibration in Silent Mode. The adjustable fan speed controller (Fan Mate 2) enables control of noise and fan performance.

- Cooler (CNPS8700 LED) - Clip Support - Clip Support Fixing Bolts - Washers - Nuts - Thermal Grease - Clip - Clip Lever - FAN MATE 2 - FAN MATE 2 Cable - Double-Sided Tape - User’s Manual

Zalman affixes a Computer Noise Prevention System (CNPS) mark to all components used for noiseless computers.

Korean Patent Registration No. 10-0600448 Korean Design Registration No. 07-9753 Patent applications pending in over 20 nations around the world including the USA, EU, and Japan.

The maximum weight for a cooler is specified as 450g for Intel Socket 775 and AMD Sockets AM2/754/939/940. Special careshould be taken when moving a computer equipped with a cooler that exceeds the specified weight limit. Zalman is not responsible for any damage that occurs when moving a computer. Check the components list and condition of the product before installation. If any problem is found, contact your place of purchase to obtain a replacement. Excessive force exerted on the fan may damage the fan, resulting in damage to the system. Zalman Tech Co., Ltd. is not responsible for any damages due to external causes, including but not limited to, improper use, problems with electrical power, accident, neglect, alteration, repair, improper installation, or improper testing.