Select Language
English
Çѱ¹¾î
ìíÜâåÞ
ñéÏÐåÞ
Home > Product > Coolers >
CPU Coolers
CNPS9300 AT
More
CNPS10X Performa
CNPS10X Flex
CNPS9900A LED
CNPS10X Quiet
CNPS9900 NT
CNPS10X Extreme
VF2000 LED
CNPS7000C-AlCu LED
CNPS7000C-Cu LED
CNPS7000C-AlCu
CNPS7000C-Cu
CNPS8700 NT
CNPS9500A LED
CNPS8700 LED
CNPS7500-Cu LED
CNPS7500-AlCu LED
CNPS9700 NT
CNPS9700 LED
CNPS8000
CNPS9500 AM2
CNPS9500 AT
CNPS7700-Cu LED
CNPS7700-AlCu LED
CNPS7700-Cu
CNPS7700-AlCu
Innovatiive, patented and curved heatpipe design for a heat transfer capacity of up to four heatpipes with the use of just two.
Pentium 4, Celeron D, Pentium D, Core 2 Duo, Core 2 Quad, Core 2 Extreme, Core i7, Core i5, Core i3, Sempron, Athlon, Athlon 64, Athlon FX, Athlon 64 FX, Opteron, Dual-Core Opteron, Phenom, Athlon X2, Athlon 64 X2, Phenom II, Athlon II
iXBT Brand 2008 – Choice of Readers
 
Socket
CPU
CPU Compatibility
Intel
1156
(1)
Core i7
Supports all speeds
Core i5
Core i3
775
Core 2 Quad
Supports all speeds
Core 2 Duo
Core 2 Extreme
Pentium Dual Core
Pentium D
Pentium 4
Celeron D
AMD
AM3
Phenom II
Supports all speeds
Athlon II
AM2+
Phenom II
Supports all speeds
Phenom
Athlon FX, Athlon 64 FX
Athlon X2, Athlon 64 X2
Athlon, Athlon 64
Sempron
AM2
Athlon FX, Athlon 64 FX
Supports all speeds
Athlon X2, Athlon 64 X2
Athlon, Athlon 64
Sempron
940
Dual-Core Opteron
Supports all speeds
Opteron
Athlon FX, Athlon 64 FX
939
Dual-Core Opteron
Supports all speeds
Opteron
Athlon FX, Athlon 64 FX
Athlon X2, Athlon 64 X2
Athlon, Athlon 64
754
Athlon, Athlon 64
Supports all speeds
Sempron
 
Note
(1)
To use the CNPS9300 series coolers on socket 1156,
ZM-CS5B
must be purchased separately.
 
Cases equipped with an Air Guide must have their Air Guide Ducts removed before installation. Install only on systems meeting the following conditions.
 
There must be no interfering components (e.g. PSU, VGA card) within 54mm distance from the center of the PSU.
There must be no interfering components (e.g. ODD) within 31mm distance from the center of the CPU.
Case chassis cover must be distanced at least 143mm away from the motherboard.
 
Dimensions
61.35(L) x 108(W) x 132.5(H) mm
Weight
407g
Base Material
Pure Copper & Pure Aluminum
Dissipation Area
2,583§²
 
Bearing Type
Superflo
Speed
1,500rpm ¡¾ 15 % ~ 2,400rpm ¡¾ 10 %
Noise Level
(1)
20.0dBA ~ 30.0dBA ¡¾ 10%
Control Method
PWM Control, Auto Restart
Life Expectancy
50,000 hours
 
(1)
Measured 1m distance away from source.
 
Does not generate noise or vibration in Silent Mode.
Compatible with all Intel Socket 775 based Single, Dual, and Quad Core CPUs, and all AMD Socket AM2+, AM2, 754, 939, 940 based Single, Dual, and Quad Core CPUs.
100% copper heatsink with aerodynamically optimized ¡°tunnel¡± design for maximum cooling efficiency.
Patented ¡°figure 8¡± heatpipe design for cooling performance of up to 4heatpipes with the use of just 2.
Low-noise 92mm PWM fan for automatic control of the fan¡¯s RPM according to the CPU¡¯s temperature.
 
Common Components
- Cooler (CNPS9300 AT)
- Thermal Grease
- Clip
- Clip Lever
- User¡¯s Manual
 
Components for Intel Socket 775
- Four (4) Clip Support Fixing Bolts
- One (1) Clip Support for Socket 775
- One (1) Backplate for Socket 775
- One (1) Clip (S-Type)
- Four (4) Bolts (for installing the cooler)
 
Component for AMD Socket AM2+/AM2/754/939/940
* No additional components
 
Zalman affixes a Computer Noise Prevention System (CNPS) mark to all components used for noiseless computers.
 
Excessive force exerted on the fan may damage the fan, resulting in damage to the system.
Check the components list and condition of the product before installation. If any problem is found, contact your place of purchase to obtain a replacement.
Do not ingest or make oral contact with the Thermal Grease. If ingested, get medical attention.
Disclaimer) Zalman Tech Co., Ltd. is not responsible for any damages due to external causes, including but not limited to, improper use, problems with electrical power, accident, neglect, alteration, repair, improper installation, or improper testing.
The operation of the PWM fan varies depending on the M/B setting. Please activate the PWM control mode from BIOS after installing. Refer to the motherboard manual for detailed information regarding the PWM control mode.
Zalman Tech Co., Ltd. is not responsible for any damages resulting from CPU Overclocking.