The high intensity blue LEDs on VF700 LED coolers stay bright even in Silent Mode. Does not generate noise or vibration in Silent Mode. Pure Copper base material ensures excellent heat dissipation. Fan installed in the heatsink(FHS) cools not only the VGA chipset and VGA RAM, but all other VGA components as well. Silent Mode and Normal Mode selection provided to accommodate the user's environment and preference.

Dimensions : 91(L) x 126.4(W) x 30(H)mm Bearing Type : 2 Ball-Bearing Weight : 270g Speed : 1,350 ~ 2,650rpm �} 10% Base Material : Pure Copper Noise Level : 18.5~ 28.5dBA �} 10%

Compatibility List   Recommended VGA Cards for VF700

ATI Radeon 9*** Series ATI Radeon X*** Series NVIDIA Geforce FX 5600(FX 5700) NVIDIA Geforce FX 5500 NVIDIA Geforce FX 5200 NVIDIA Geforce4 MX Series NVIDIA Geforce 6600 Series NVIDIA Geforce FX 5700(Ultra) Series NVIDIA Geforce FX 5950 Series NVIDIA Geforce FX 5900 Series NVIDIA Geforce FX 5800 Series NVIDIA Geforce4 TI 4 Series ATI Radeon X1800 Series NVIDIA Geforce 9500 GT NVIDIA Geforce 9400 GT NVIDIA Geforce 7900 GT Series NVIDIA Geforce 7800 GTX Series NVIDIA Geforce 7800 GT Series NVIDIA Geforce 7600 Series NVIDIA Geforce 6800 Ultra NVIDIA Geforce 6800 Ultra Series NVIDIA Geforce 6800 GT Series NVIDIA Geforce 6800 Series NVIDIA Geforce 6800 LE Series

- Heatsink Assembly (VF700-Cu LED) - Eight RAM Heatsinks - One Brace Plate - Two Nipple A - Two Nipple B - Four Bolt A - Four Bolt B - Six Rubber Rings - Thermal Grease - One Muti-Connector - User's Manual - in English and Korean

Zalman affixes a Computer Noise Prevention System (CNPS) mark to all components used for noiseless computers.

After installing this product on a VGA card, a PCI slot adjacent to the AGP (or PCle) slot will become unusable. This product is not compatible with Matrox VGA cards and NVIDIA PCX 5*** VGA cards. To enhance the performance of this product, using a rear case fan is recommended. Zalman is not responsible for any problems arising from incorrect installation. The Nipples MUST be tightened by hand. Using tools to tighten the nipples may break the tip of the nipples.