 |
| |
 |
Socket |
 |
CPU |
 |
Silent Mode
(1,350~1,800rpm) |
 |
Low-noise Mode
(1,800~2,600rpm) |
 |
Compatible
Motherboard |
|
| Intel |
478 |
Celeron |
Supports all speeds |
Supports all speeds |
 |
| Celeron D |
| Pentium 4 |
| 775 |
Celeron D |
Supports all speeds |
Supports all speeds |
 |
| Pentium 4 |
| Pentium D |
| Core 2 Duo |
| Core 2 Quad |
| Core 2 Extreme |
| AMD |
754 |
Sempron |
Supports all speeds |
Supports all speeds |
 |
| Athlon 64 |
| 939 |
Athlon 64 |
Supports all speeds |
Supports all speeds |
| Athlon 64 X2 |
| Athlon 64 FX |
| Opteron |
| Dual-Core Opteron |
| 940 |
Athlon 64 FX |
Supports all speeds |
Supports all speeds |
| Opteron |
| Dual-Core Opteron |
|
|   |
| To use the CNPS9500 series coolers on socket 1366, ZM-CS4A must be purchased
separately. |
| |
 |
|
 |
|
| Dimensions |
85(L) x 112(W) x 125(H) mm |
| Weight |
530g |
| Base Material |
Pure Copper |
| Dissipation Area |
3,698? |
| Thermal Resistance |
Silent Mode |
0.16C/W |
Low-noise Mode |
0.12C/W |
|
| |
 |
|
| Bearing Type |
2 Ball-Bearing |
| Speed |
Silent Mode |
1,350rpm } 10 % |
Low-noise Mode |
2,600rpm } 10 % |
| Noise Level |
Silent Mode |
18.0dBA } 10% |
Low-noise Mode |
27.5dBA } 10% |
|
|
 |
Dimensions : 70(L) x 26(W) x 26(H) mm |
Weight : 20g |
Output Voltage : 5V ~ 11V } 2% |
|
Allowable Power : 6W or lower |
Connector : 3-Pin |
 |
|
|
| |
 |
 |
100% copper heatsink with aerodynamically optimized
gtunnelh design for maximum cooling efficiency. |
|
 |
Innovative and patented, curved heatpipe design for
a heat transfer capacity of up to 6 heatpipes with the
use of just 3. |
|
 |
Optimized heatsink layout for maximum cooling efficiency
with minimal materials. |
|
 |
0.2mm ultra-slim fins for minimized weight and reduced
airflow resistance. |
|
 |
Ultra quiet CNPS 92mm opaque fan with blue LEDs. |
|
 |
Aerodynamically optimized heatsink for smoother airflow
and minimal noise. |
|
 |
Compatible CPUs
- Intel : All Dual Core Pentium CPUs (Socket 775), All
Pentium 4 CPUs (Socket 775/478)
- AMD : All Dual Core AMD Athlon 64 x2 CPUs (Socket 939),
All AMD Sempron/AMD64 CPUs (Socket 754/939/940) |
|
 |
Adjustable fan speed controller (FAN MATE 2) enables
control of noise and fan speed. |
|
|
|
| |
 |
 |
 |
|
Common Components |
|
- CNPS9500 LED
- Thermal Grease
- Fan Speed Controller (FAN MATE 2)
- Cable for FAN MATE 2
- Double-sided Tape (to attach FAN MATE 2)
- One(1) S-Type Clip (for installing Socket 775/478)
- One(1) L-Type Clip
(for installing Socket 754/939/940)
- Four(4) Bolts (for installing the Cooler)
- Userfs Manual |
|
Components for Intel Pentium 4 (Socket 478) |
|
- Two(2) Clip Supports for
Socket 478
- Two(2) Install Bolts for Socket 478
- One(1) L-Wrench |
|
|   |
  |
 |
 |
|
Components for Intel Dual Core Pentium
/ Pentium 4 (Socket 775) |
|
- Four(4) Clip Support Fixing
Bolts for Socket 775
- One(1) Clip Support for Socket 775
- One(1) Backplate for Socket 775 |
|
Components for AMD Sempron/AMD64
(Socket 754/939/940) |
|
| - Two(2) Nipples (Motherboards
with Pushpin-type Retention Frame need) |
|
|
|
| |
 |
| Zalman affixes a Computer Noise Prevention System (CNPS) mark to all components
used for noiseless computers. |
| |
 |
 |
Korean Patent Application No. 05-45737 |
|
 |
Korean Design Applications No. 05-15303, 15304, 15306, 15307, 17970,
17971 |
|
 |
Patent applications pending in over 20 nations around the world
including USA, EU, and Japan. |
|
| |
 |
 |
The maximum weight for a cooler is specified as 450g
for Intel Socket 775 and AMD Socket 754/939/940. Special care
should be taken when moving a computer equipped with a cooler that
exceeds the specified weight limit. Zalman is not responsible for
any damage that occurs when moving a computer. |
|
 |
Fan rotates at 2,600rpm when directly connected to 3-pin header
on motherboard, without using a FAN MATE 2. |
|
 |
Zalman Tech is not responsible for any damages arising from using
the product outside of its intended purpose. |
|
 |
CPU and/or motherboard may become damaged if the product is incorrectly
installed. Familiarize yourself with the gInstallationh steps before
installing the product. |
|